accessories

Tonearm Wand TDTW-01Ti

TechDAS is pleased to offer an option to upgrade the acknowledged Graham’s PHANTOM Elite tonearm. This new titanium arm wand has been developed based on our accumulated experiences of engineering and technology in metal processing. It is perfectly compatible with the Phantom Elite 10 inch or 12 inch and offers a significant improvement in performance. the TDTW-01Ti employs pure titanium with special hardening treatment, which is light-weighted and highly rigid.

TDC01 Reference MC Phono Cartridge

The TDC01 cartridge features a novel egg-shaped housing made of A7075 Super Duralumin, and although difficult to machine with such extreme precision, is an ideal form factor to dissipate extraneous energy coming from the record groove.

Output voltage: 0.45mV (1kHz)

Recommended Tracking force: 2.0 – 2.3g

Cantilever: super duralumin (A2017)

Stylus: Semi-line contact (3μm x 30μm)

TDC01 Ti
The Ultimate MC Cartridge with Titanium and Boron Technology.

TDC01 Ti is the supreme MC cartridge based on the original TechDAS TDC01 cartridge. It employs titanium technology for the unique egg-shaped housing and the cartridge support base section, and boron for cantilever.

Output voltage: 0.45mV (1kHz)

Recommended Tracking force: 2.0 – 2.3g

Cartridge weight: 17g

Cantilever: Pure boron

Stylus: Semi-line contact (3μm x 30μ

TechDAS One Piece Universal Titanium Headshell

Ideally, a headshell must achieve both high rigidity and a low mass. This is a very challenging subject because high rigid materials are often difficult to machine and some headshells of such materials have a very thick wall and thus high mass, which is undesirable for a headshell.

We at TechDAS have pride in our deep knowledge and experience on advanced metal processing technologies, and have successfully implemented a high strength frame construction and a thin wall thickness in this headshell. Furthermore we integrated the joint section for a tonearm which is now all encompassing, a feat which requires the first rate processing technologies.

TechDAS Disc Stabilizers

Unlike most disc stabilizers that rely on their mass to reduce the vibration on a record, which do not eliminate the vibration energy itself, TechDAS Disc Stabilizers can eliminate the micro vibration on the record using materials with top level vibration absorption as well as optimally simulated design.

Two models are available: the Series II A7075 super duralumin and the identical looking Ultimate Titanium.

The Air Force Mounting Rack

The Air Force Mounting Rack was developed in collaboration with Artesania Audio based on their EXOTERYC racks. It ensures a rock-solid stability for sound reproduction through their state-of-the-art research and technologies on vibration isolation.

The Air Force One Mounting Rack and Air Force Two Mounting Rack have positioning guides for installing the turntable to ensure the best performance.

TechDAS Insulation Base

Through the development of our reference analog turntable, Air Force One, TechDAS has accumulated a considerable amount of know-how on metal material involved, including; the correlation between physical metallurgy and sound, changes in sound quality caused by the combination of dissimilar metal.

TechDAS Insulation Base is an excellent spike base that has been developed by fully drawing on our accumulated knowledge of metallurgy. It tremendously improves the S/N and you can actually feel the changes in sound quality such as a sharper and focused sound.

TechDAS Banana Plugs

TechDAS Banana Plugs are the perfect solution to connect any speaker cables with your amplifier and/or loudspeakers. To keep the sound signal purity, to ensure the very stable connections, we proudly offer to use TechDAS Banana Plugs for your speaker cables. 

The Super Banana is for the stripped cables and The Spade Banana is for the Spade lugs terminated cables.  Each set contains 4 pcs (2 red and 2 Black) of plugs in the case. 

Super Linear IC Interconnect cable

• Coaxial structure based on the ultra HF transmission technology

• PTFE (teflon) inductor

• Silver coated OCC Copper conductor
  No soldering plug

• Minimum length 1 meter, available in 0.5 meter steps.